HOW TO APPLY HEAT TRANSFERS
|A. Trim excess material surrounding applique. (be careful not to move or cut off any stones)||B. Remove the white film from the clear adhesive sheet, and set your iron on the highest setting. (Be sure not to use steam)||C. Place the clear sheet on your garment with the design side up. The adhesive side will be down at this point.|
|D. Carefully turn the garment inside out. You want to avoid shifting the stones at this time. Then cover the design area with the Teflon sheet and apply heat, keeping constant pressure for approximately 30 seconds.||E. Carefully turn the garment right side up, cover the design with Teflon sheet and apply heat, keeping constant pressure for approximately 30 seconds.||F. Press stones through clear sheet to ensure all stones have adhered to garment. (Caution: Will be hot, use cloth) Allow to cool for 2 minutes.|
|G. Carefully remove clear sheet, take the sheet off very slowly to make sure no stones get moved out of place.||H. Place Teflon sheet on top of stones, and apply heat for approximately 10 seconds.||I. Let the heat transfer cool and you've successfully applied a heat transfer!|
Metallic nailheads & crystal stones will not adhere to the following materials: leather, imitation leather, oil treated fabrics, waterproof coated fabrics (teflon, silicone), and rubberized materials.