Upcycled Tee Shirt Bag DIY

How many of you have countless amounts of tee shirts lined up in your drawers? Why not transform your tee into something you’ve been eyeing in stores…a cute rocker chic tote, for example. Here at M&J we’re always looking for ways to amp up our clothes. Since it is Earth Day we felt it was the perfect time to recycle something old and make it new again. We were immediately inspired after coming across this  tutorial, and we decided that revamping one of our many old tees would make a perfect Earth Day DIY.

DSC_0501

SUPPLIES:

Tee Shirt (we used a black one)

12mm x 8mm iron-on Skull Nailheads (leftover from our Alexander McQueen Inspired Bag DIY)

Scissors

Iron

1 1/2″ Polyester Mono Ribbon 

STEPS:

Lay your shirt on a flat surface. The first thing that you will be doing is cutting the bottom off.
NOTE: The amount you cut off will determine the size of our bag. We only cut off an inch but if you are looking to create a smaller bag feel free to cut off more.

DSC_0390

Using your ruler mark off 6 inches from the bottom of your shirt and lay the ruler across the width of the shirt.
Create small 2 cm cuts from the bottom of your shirt extending to the ruler

DSC_0401

The bottom of your tee shirt at this point should look almost like a fringe with wide strands hanging down.

DSC_0404

Once the bottom of your shirt is completely cut into a two-layered fringe, begin to pull and knot the front and back strands together.

DSC_0413

DSC_0414

Gently pull the completed bottom to stretch out the bag

DSC_0423

Use the same cutting method for the sleeves of of the tee.  This will be a decorative detail on the finished bag.DSC_0429

Cut identical slits extending from the end of the sleeve to the shoulder.

DSC_0437

Pull these strands as well.

DSC_0439

Knot each of these strands together except for the first one that is closest to your collar. The strands you have not knotted will be a hole through which you will slip the bag strap.

DSC_0445

At this point your tee shirt should look something like this:DSC_0448

Since we had our iron-on skull studs leftover from our Alexander McQueen Inspired DIY we ironed them onto the tee shirt to add an extra pizzazz.

DSC_0481

DSC_0498

We used our 1 ½” Polyester Mono Ribbon as a strap.  We pulled the 1 1/2″ Polyester Mono Ribbon through one sleeve of the tee and over through the other tying the ends into a knot.

DSC_0511

DSC_0514

DSC_0517

And there we have it: a tee-shirt-turned-bag that we can now reuse and wear out on the town.

DSC_0529

If you made any eco-friendly DIYs, embellished something old, or transformed a garment into something new…share it with us!  We love getting inspiration from our readers and seeing all your great ideas and DIYs.  Happy Earth Day!

16 thoughts on “Upcycled Tee Shirt Bag DIY

  1. What’s up, for all time i used to check blog posts here in the early hours
    in the morning, for the reason that i love to find out more and
    more.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.