M&J Project Center

Rhinestone heat transfer appliqué shirt

Take a walk on the wild side with this reptile design rhinestone iron-on appliqué shirt.

Instructions

1. Select an appliqué.
2. Cut excess material surrounding appliqué.
3. Set Iron to cotton setting (no steam).
4. Remove white film from clear adhesive sheet.
5. Place sheet on garment with design side up (adhesive side down).
6. Turn garment inside out so you can apply heat to adhesive side of stones.
7. Cover design area with Teflon sheet and iron for approximately 30 seconds, keeping constant pressure.
8. Immediately turn to right side of garment. Iron for approximately 30 seconds.
9. Press stones through clear sheet to ensure that all stones are adhering to garment.
10. Allow to cool.
11. Remove clear sheet.
12. Place Teflon sheet on top of stones. Iron design for approximately 10 seconds.